Industrial Waste Incinerator

Any device or system which utilizes combustion and/or thermal oxidation to destroy or reduce an industrial waste can be classified as an industrial waste incinerator. Most commercial, industrial, municipal and institutional wastes are classified by composition and heating value. In 1968, the Incinerator Institute of America used general classifications to define waste streams. Even though these classifications are broad and somewhat outdated (the definition and composition of these waste streams have changed with advances in technology, products and services), they still serve as a reference for industrial waste incinerators. These waste classifications were defined as follows:

Type 0 Waste – Trash consisting of highly combustible waste paper, wood, cardboard cartons and including up to 10% treated papers, plastic or rubber scraps from commercial and industrial sources. Type 0 Waste has a heating value of 8,500 Btu per pound, a moisture content of 10% (by weight) and an ash content of 5% (by weight).

Type 1 Waste – Rubbish consisting of combustible waste paper, cartons, rags, wood scraps, combustible floor sweepings from domestic, commercial and industrial sources. Type 1 Waste is a mixture of 80% (by weight) rubbish and 20% (by weight) garbage. It has a heating value of 6,500 Btu per pound, a moisture content of 25% (by weight) and an ash content of 10% (by weight).

Type 2 Waste – Refuse (Municipal Solid Waste) consisting of rubbish and garbage from residential sources (50% rubbish and 50% garbage). Type 2 Waste has a heating value of 4,300 Btu per pound, a moisture content of 50% (by weight) and an ash content of 7% (by weight).

Type 3 Waste – Garbage consisting of animal and vegetable food wastes from restaurants, hotels, markets, institutional, commercial and club sources. Type 3 Waste is a mixture of 65% garbage and 35% rubbish. It has a heating value of 2,500 Btu per pound, a moisture content of 70% (by weight) and an ash content of 5% (by weight).

Type 4 Waste – Pathological Waste consisting of 100% animal and human tissue. The principal components are carcasses, organs, solid organic wastes from hospitals, laboratories, abattoirs, animal pounds and similar sources. Type 4 Waste has a heating value of 1,000 Btu per pound, a moisture content of 85% (by weight) and an ash content of 5% (by weight).

Type 5 Waste – Industrial process wastes including gaseous, liquid or semi-liquid wastes. The composition, heating value, moisture content and ash content of Type 5 Wastes are variable and must be confirmed by a waste analysis.

Type 6 Waste – Semi-solid and solid combustible wastes which require hearth, retort or grate burning equipment. The composition, heating value, moisture content and ash content of Type 6 Wastes are variable and must be confirmed by a waste analysis.

Process Combustion Corporation (PCC) designs, fabricates and supplies industrial waste incinerators to safely and efficiently destroy many types of gaseous and liquid wastes (Type 5 Wastes as outlined above).

Home

Company Information

Thermal Oxidizers


- Dynamometer Testing
- Emissions Control
- VOC Destruction/Removal
- Waste Heat Boiler
- Thermal Oxidizer Sales
- Oxidizer Experience
- Oxidizer Design
- Industrial Incinerator
- Post-Combustion NOx
Reduction (SCR & SNCR)

Air Heaters

Burners & Combustors

Biofiltration

Environmental Engineering Consulting

Parts & Service

Contact Us

Request Information

Locate a Rep

Site Map



Join Our Mailing List
Email:

© 2011
Process Combustion Corporation

5460 Horning Road, Pittsburgh, PA 15236

Phone: +1(412) 655-0955
Fax: +1(412) 650-5569

Process Combustion CorporationProcess Combustion Corporation Ask A Hassle Free Question Click to Email PCC